10t Hoist And Crane Used Lifting Hook

Five points for attention of crane hook 1. Casting hooks shall not be used in crane equipment; The hook shall be provided with a safety device to avoid accidental uncoupling of the hanging object; The surface of the hook should be smooth and clean, without acute Angle, burr, crack, crack, etc....

Product Details

Five points for attention of crane hook

1. Casting hooks shall not be used in crane equipment;

The hook shall be provided with a safety device to avoid accidental uncoupling of the hanging object;

The surface of the hook should be smooth and clean, without acute Angle, burr, crack, crack, etc.

Hook material should also be used in high quality low carbon sedation steel or low carbon steel containing gold.

2. According to the safety regulations of lifting machinery, the lifting hook should have the certification documents of production unit, so that it can be put into use.

Otherwise it can only be used after it has been tested and proved to be qualified.


3. The defects on the crane crane can't be patched up.

4. The board hooks usually use the Q235 specified in gb700-88 normal carbon structural steel technical conditions, or 16Mn specified in GB/t1591-94 low alloy high-strength structural steel.

5. The forged hooks usually use 20 steel specified in gb699-88 technical conditions of high-quality carbon structural steel.

Only the crane hooks that meet the above standards are more qualified. Tianche bao is a company specializing in the production of various crane equipment. More crane information is welcome to pay attention to the official website of tianche bao technology.


Please be free to buy the 10t hoist and crane used lifting hook with the best price with our professional China manufacturers and suppliers. And the customized products are also offered if you need.
Inquiry