16t Crane Hook

Specifications for crane hooks: 1. The load should be in the middle of the hook holder when lifting the weight. 2. When lifting, it should be as smooth as possible, with hook set to avoid impact load. 3. The surface of the hook should be kept clean, and there should be no peeling, sharp Angle,...

Product Details

image

image

image

image

Specifications for crane hooks:


1. The load should be in the middle of the hook holder when lifting the weight.


2. When lifting, it should be as smooth as possible, with hook set to avoid impact load.


3. The surface of the hook should be kept clean, and there should be no peeling, sharp Angle, burr, crack, etc.


Notes for use of hook group:


1. Overloading is strictly prohibited in the hook group. When loading the weight, it should be as uniform and smooth as possible to avoid large shaking.


2. Do not carry out hoisting operations before the object is fully lifted or when it is shaking violently.


3. When hoisting operation is carried out, care should be taken to avoid damage of components caused by violent collision between the hoisted items and the hook group.


Standard for scrapping hook group:


1. Cracks;


2. Wear of dangerous section reaches 10% of the original size;


3. The opening degree is 15% higher than the original size;


4, torsional deformation of more than 10 °;


5. The dangerous section or the hook neck produces plastic deformation;


6. If the wear of the liner of plate hook reaches 50% of the original size, the liner shall be scrapped;


7. The spindle of plate hook should be scrapped when the wear reaches 50% of the original size.


Please be free to buy the 16t crane hook with the best price with our professional China manufacturers and suppliers. And the customized products are also offered if you need.
Inquiry