Laminated Single Hook

Description Fixed laminated hook is equipped with a clamp mouth arm after clamping the slab, with the lifting of the car, the boom along the fixed inclined plane slide down, at the same time clamping the slab more and more tight.Finally, the movable arm and fixed arm are integrated.The heavier...

Product Details

Description

Fixed laminated hook is equipped with a clamp mouth arm after clamping the slab, with the lifting of the car, the boom along the fixed inclined plane slide down, at the same time clamping the slab more and more tight.Finally, the movable arm and fixed arm are integrated.The heavier the slab, the greater the clamping force.In the clamping device, magnetic powder clutch and zero-speed switch are installed. When the plate is clamped, the magnetic powder clutch will slip when the load increases. When the output speed is zero, the zero-speed switch will detect and the clamping signal lamp will be on.It is widely used in continuous casting workshop, hot rolling mill slab warehouse, transportation station, freight yard and dock.

Features:

1) suitable for one or more slab handling at a time.For 94t clamps can clamp 1~4 blocks, by height detection device CAM switch detection.

2) the operation efficiency is relatively the highest.It can be made into automatic control slab clamp.For example, hot rolling mill roller feeding.

3) relatively high cost and complex maintenance.Added electric control system and cable reel;Added drive equipment, motor, reducer, magnetic powder clutch, electromagnetic brake;The detection device and equipment are added, such as clamping detection, opening detection, travel limit position detection, height detection.

4) computer management of slab library can be realized.

Features:

·DIN 15407

·Loading Capacity: From 16T to 320T

·Hook Size: According to standard or client’s requirements.

·Service: Provide hook solutions with drawing according to client's operating requirements

The Ladle Beam is designed to carry single ladles by two laminated ladle hooks, or so-called j-hooks. The beam is robustly engineered to withstand the high requirement in a foundry. 
Furthermore, any load can be attached by strap or by rope to the beam’s free rotating crane hook.

The beam itself is suspended to the crane trolley either by hooks or sheave blocks.

Customized suspensions on request.

image

 If you need any require, please contact with me. My email: amy@allwherecrane.com


Inquiry